Bug #13
closedWifi AP gets torn down after a few minutes
0%
Description
Wifi AP gets torn down a few minutes after setup even though one client (iPad, smartphone, PC) is connected to it. Then the client fails to automatically reconnect. Manual reconnection attempts also fail as password is requested but gets rejected.
Please have a look at attached tests results file showing some figures related to this issue.
Tests conditions are: wifi activated by setting startAtInit
parameter of wifi-rp-service-wifi-ap-default-config.json
file to true
, no badge reader, no start
verb sent.
Meaning of figures:
First line: tests conditions
First column: time of reboot
Second column: number of minutes/seconds needed for the iPad to detect the AP
Third column: number of minutes/seconds needed for the iPad to connect to AP
Fourth column: web socket connection attempt, then disconnection
Fifth column: number of minutes/seconds for the iPad to lose connection to the AP
All times are relative to the reboot time.
On the third test the AP was detected but no connection after 15mn so I rebooted.
Files
Updated by Emmanuel Jubera [SAFT] over 2 years ago
The tests were performed before new drivers were included in the redpesk image. Since the release of a new redpesk image initial connection after reboot is much quicker (around one minute). Unfortunately AP loss still occurs.
Updated by Salma RAISS over 2 years ago
- Status changed from New to In Progress
- Assignee changed from Vincent Rubiolo to Salma RAISS
Updated by Emmanuel Jubera [SAFT] over 2 years ago
- Priority changed from High to Normal
Priority changed from High to Normal as a workaround is available.
Updated by Sebastien Douheret [IoT.bzh] over 2 years ago
- OS Fix Version/s arz-1.1 added
Updated by Sebastien Douheret [IoT.bzh] over 2 years ago
Fix will be available in next release: arz 1.1
Updated by Sebastien Douheret [IoT.bzh] about 2 years ago
- OS Affects Version/s arz-1.0.0 added
Updated by Salma RAISS about 2 years ago
- Status changed from In Progress to Resolved
The wifi gets torn down due to a conflict with NetworkManager.
A solution is now implemented to fix this conflict.
Updated by Sebastien Douheret [IoT.bzh] almost 2 years ago
- Target version changed from arz-1.0 to arz-1.0.1
Updated by Sebastien Douheret [IoT.bzh] almost 2 years ago
- OS Fix Version/s arz-1.0.1 added
- OS Fix Version/s deleted (
arz-1.1)
Updated by Sebastien Douheret [IoT.bzh] almost 2 years ago
- OS Affects Version/s arz-1.0 added
- OS Affects Version/s deleted (
arz-1.0.0)
Updated by Sebastien Douheret [IoT.bzh] almost 2 years ago
- Status changed from Resolved to Closed